ПЭТ-кристаллизаторы - SCR

Дополнительная информация:
0%

    ■ Features

    • Fixed speed of agitator makes materials not lump together during the crystallization.
    • Simplify and improve drying efficiency.
    • Materials can be dried under high temperature to improve drying efficiency.
    • Cyclone dust collector is standard, which is applied to dust-rich place. Can effectively reduce the load on filter bag, and reduce the number of times of filter bag cleaning, thus extend the life span of the filter bag.
    • With double overheat protector, it can reduce the possibility of either mechanical or man-made problems.
    • Equipped with rotary valve with good sealing performance, which can output crystallized material accurately.
    • Equipped with material level switch, which can detect material level accurately and make operation reliable.
    • Equipped with negative pressure tester(excluding SCR-1600U) to immediately test the ventilation of the filter. Give an alarm when the negative pressure is higher than the setting value, clean the filter to avoid blockage.


    ■ Options

    • Collocate with dehumidifier to fulfill dehumidification directly.
    • Safety ladder is optional(only for SCR-900U and above models).
    • Auto loader, Vacuum hopper receiver are optional for material conveying.
    • The optional flexible screw feeder can be added for stable and even conveying of un-crystallized material such as PET flakes.
    • External pipeline is optional with the stainless steel configuration.


    Рисунок2.jpg


    Рисунок3.jpg



    ■ Application

    Рисунок4.jpg


    ■ Working Principle

    Once material filling starts, heat blower starts up and material heating begins. Control cabinet would stop sending signals to auto loader when material filling amount is higher than material level switch. Then mate­rial heating lasts for a while. When temperature sensing needle detects the value of reaching the set crystal­lized temperature, material would be conveyed out via feeding device; meanwhile, as material level in hopper lowers gradually, filling device starts to supply the uncrystallized material accordingly to realize the continuous crystallization process.

    When temperature sensing needle detects the temperature value of stopping material conveying, feeding device halts. If temperature rises again to reach the set crystallized temperature, feeding device will be activated to work so that the continuous crystallization process can be realized through this kind of circle.

    Рисунок5.jpg

    Рисунок6.jpg



    ■ PET Property

    PET material is well-used in textile fiber, food and chemical packaging. Tape stripes, industry thread, heat- resistant dishware. Air bubble and chapping will take place due to its high moisture content.

    With this drying demand and the development on plastic industry, Shini provides a series of secured and reli­able drying and dehumidifying technologies for PET molding and other PET product manufacturers.

    Shini's PET system has great technology to meet various application needs.

    •       Bottle and blank making

    •       Thermal forming film and sheet making

    •       Strapping tape and industrial yams making

    •       Tubing making

    •       Waste recovery making

    Характеристики

    Модель SCR-160U SCR-450U SCR-900U SCR-1600U SCR-2500U
    Heater Power kW 12 24 48 96 128
    Blower Power kW, 50/60Hz 0.55 2.2 3 7.5 15
    Blending Motor Power kW, 50/60Hz 0.25 0.55 1.5 2.2 4
    Max. Throughput kg/hr 50 150 300 500 750
    Ib/hr 110 331 661 1102 1653
    Hopper Capacity L 160 450 900 1600 2500
    Gal 42.3 118.9 237.8 422.7 660.4
    H mm 2380 3850 4550 5350 5710
    inch 93.7 151.6 179.1 210.6 224.8
    H1 mm 280 720 1040 820 890
    inch 11 28.3 40.9 32.2 35
    H2 mm 380 1060 1185 1240 1270
    inch 15 41.7 46.7 48.8 50
    H3 mm - - 5260 6010 6260
    inch - - 207 236.6 246.5
    W mm 1040 2370 2890 2510 3700
    inch 40.9 93.3 113.8 98.8 145.7
    W1 mm 1140 1440 1930 2160 2310
    inch 44.9 56.7 76 85 90.9
    W2 mm - 800 800 - 800
    inch - 31.5 31.5 - 31.5
    W3 mm - - 3640 3295 4400
    inch - - 143.3 129.7 173.2
    W4 mm - - 2020 2200 2360
    inch - - 79.5 86.6 92.9
    ФA mm 3 5 6 8 8
    inch 0.12 0.2 0.24 0.31 0.31
    ФB mm 4 4 5 5 5
    inch 0.16 0.16 0.2 0.2 0.2
    Weight kg 235 500 865 2290 2790
    lb 518 1102 1907 5049 6151
    Цена
     

    ■ Outline Drawings


    Рисунок7.jpg

    Рисунок8.jpg



    Рисунок9.jpg

    Рисунок10.jpg