Центральный охладитель воды SICC-A
|Cooling Capacity (the outlet temperature 15C/59 F of chilled water under the environmental temperature of 35C /95F)||kW||60||90||120|
|Cooling Capacity (the outlet temperature 15C/59F of chilled water under the environmental temperature of 35C/95F)||kcal/hr||51,600||77,400||103,200|
|Cooling Capacity (the outlet temperature 7C/44.6F of chilled water under the environmental temperature of 35C/95F)||kW||50||75||97|
|Power||ЗФ, 400VAC, 50Hz|
|Crank Case Heater (kW)||0.09x2||0.09x2||0.12x2|
|Cooling Flow (m3/hr)||10.3||15.5||20.6|
|Pressure Loss (kPa)||27||40||53|
|Pipe Coupler (inch)||5||5||5|
|Condenser||Type||Fin style Air-cooled Condenser|
|Blower Power (kW)||1.6||2.2||3.2|
|Air Quantity (m3/hr)||26,000||39,000||52,000|
|Machine Dimension||W (mm)||2,163|
|Weight||Before Packing (kg)||810||940||1,300|
|Before Packing (lb)||1,785.7||2,072.3||2,866|
|After Packed (kg)||850||1,000||1,370|
|After Packed (lb)||1,873.9||2,204.6||3,020.3|
|Unit Conversion||1kW=860kcal/hr 1RT = 3,024 kcal/hr 10,000Btu/hr = 2,520kcal/hr|
■ Features• Modularized design makes it easier to combine module units 1-15. Cooling capacity can be enlarged by increasing the number of modules or choose appropriate modules to connect to existing system.
• The water route of the modules can be linked via linking one module to the inlet/outlet water tube. No need to install the inlet/outlet water tube for each module alone. The soft rubber tube is used to connect the modules, thus it is very convenient to construct.
• Adopt components like scroll compressor, expansion valve which ensure stable performance. The whole unit will not stop due to one module failure.
• When the unit starts up, the controller of the master unit will automatically ON/OFF and load of each module according to system load. Hence, lowering energy consumption during non-peak hours.
• Link individual controller, capable of detaching any module to realize another cooling system.
• Protection grade: IP54.
• Equipped RS485 communication realizes remote monitoring and network function.
SIC-A-R2 series are applicable for cooling moulds to reduce the product moulding cycle; they are also available in the cooling of equipment to maintain a normal temperature. Besides, they are suitable for other industries with the need for water cooling.
■ Working Principle